A metal wall art piece featuring the word 'ATF' in stylized cutout letters, with an additional abstract curved shape rising above the letters. The metal has an iridescent gold finish with rainbow color shifts, shown against a dark gray background.

A metallic snake-shaped pendant or wall hanging with a marbled finish of silver, blue, copper, and dark tones, shown against a plain gray background.

A coffin-shaped hanging ornament or plaque with 'RIP' engraved on it, glowing with warm amber light from within against a dark background.

A metal wall hanging shaped like a cartoon bear wearing a cowboy hat and holding two revolvers, shown against a dark fabric background.

These are a few part that make up the wind chime. The round disk attaches to the long wire while the three strands hold the main ring. The 4-short strand connect the bottom of the ring to the 4-tubes. The last strand connects from the bottom of the ring to the striker.

These are a few part that make up the wind chime. Main wires to hold suspension ring and long line connects to top of striker disk.

Five metal wire fishing hooks with swivels used to connect from suspension ring to 4 resonating tubes along with from bottom or striker ring to top of wind sail.

Four black cylindrical tubes with a fine glittery texture and hook attached inside. These are the resonating tubes of the wind chime.

A close up of the striker showing the attachment lamp fixture ring used to hold either the wire from the suspension ring and another same connector holding unseen on bottom that holds the wire to the wind sail.

Our items are made in USA with the exception of the ones purchased on Amazon (where they come from ???) All parts are then combined in hand made items being listed.

Wind Chimes for Gun Enthusiasts

$75.00

Right to Bare Arms

Don't Tread on Me Wind Chime

Over My Dead Body

Right to Bear Arms

Second Amendment

We are pleased to introduce a new line of Wind Chimes aimed at the Gun Enthusiasts who are ready to sound off and show their support for our 2nd. amendment rights we have here in the USA!

We offer a number of different Logos cut into the top ring/suspension platform of the Chimes

Check out the images and Videos showing them and the pieces that each chime is made up of. **PLEASE NOTE** you can choose which suspension ring/saying you want to match up with the sail design you prefer! The videos show what we believe makes sense but in today's world, seems like anything goes!

Each chime is hand made heat treated or painted as seen in the images. Due to the nature of heat treating, the holographic coloring of each part will vary from chime to chime, (don't expect your chime to match the ones in the videos).

Many parts will arrive already connected in a group consisting of the main hanger wires that connect to ring and down to the striker. This group is made up of a top S hook connected to 3- 4-1/2" long steel leader lines which connect to the top holes in the suspension ring/saying along with a 14" long steel leader line that connects to the top of the striker.

There are 4- 2-1/2" long leader lines with attached S hooks that go from the bottom of the suspension ring down to the 4 sized resonating tubes which make the various tones as the striker hits them.

From the bottom of the striker, the last 4-1/2" line with S hook connects to the wind sail. There is also a length of chain supplied that can be used to hang the complete chime from the top S hook to your mounting/hanging location.

The suspension ring, striker and sail are cut from 20 gauge steel. These parts get heat treated to produce the holographic coloring. They then receive 2-coats of Rust-Oleum Painter's Touch 2X Ultra Cover Clear Semi-Gloss Paint.

The resonating tubes receive 2-coats Flat Black, a coat of Rust-Oleum® Color Shift Spray Paint and 2-coats of Rust-Oleum Painter's Touch 2X Ultra Cover Clear Semi-Gloss Paint.

We use 45 lb. test Black Nylon coated Stainless Steel leader wire for all the connection points which are cut to length and looped using Nickel Plated Copper Crimp Sleeves.

The 18" length of stainless steel chain supplied is rated for 50 lb. while the striker top and bottom connectors are purchased lamp pipe nipples and chandelier lamp connectors.